We ask you to remove all the plants and pots to protect them from any cleaning chemicals and water damage.

What we use:

• Hot jet wash (set at 60°c).
• Biodegradable lifting agent to loosen algae and dirt.
• Distilled water to rinse and reduce water marks.
• Disinfectant spray for the underside of benches and for washing the floors.

We are always testing new techniques and products to develop our service to ensure that your greenhouse gets the best clean and care.

What do we need from you?

• Please ensure the greenhouse is clear before our arrival on site.
• Use of a 13 amp power socket.
• Cold water supply.

The Process:

• Aluminium and glass will be cleaned using a mild lifting agent (eco-friendly) and then pressure-washed both internally and externally.
• The structure is then rinsed off to minimise water marks leaving the greenhouse sparkling.
• All glass overlaps will be pressure-washed to remove the majority of algae & debris that may be present (please note: there will be minimal overlap stain remaining as it is not possible to remove all traces of algae).
• All gutters and valleys will be cleaned out and downpipes checked for blockages.
• The underside of benches will be disinfected, along with the floor being pressure-washed. 
• Internal reservoir will be emptied out and cleaned.
• Cold frames will be cleaned to the same specification as the greenhouse. 
• All moving parts will be checked and lubricated. This applies to the vent torque tube supports, auto vent mechanism, auto vent opener pivots and adjusters and door hinges and locks, as well rack and pinion vent opening mechanisms. If anything requires replacing, your service engineer will provide recommendations. 
• All shades will be cleaned in situ and re-tensioned where necessary. If required the shades will be taken down to be cleaned (please note: shades will not be restored to their original condition, as algae staining cannot be completely removed).